# How To Measure Crossbow String Length – A Step-By-Step Guide

## Introduction

In order how to measure crossbow string length, you will need the following materials: a measuring tape, a crossbow, and an arrow. First, you will need to find the center of the bowstring. To do this, measure the distance from the end of the bowstring to the inside of the limb on each side of the bow. Once you have these measurements, add them together and divide by 2. This will give you the distance from the end of the bowstring to the center of the bowstring. Next, you will need to find the length of your arrow. To do this, measure the distance from the tip of the arrow to the back of the arrow (where it meets the bowstring). Finally, you will need to add these two numbers together to get your final measurement. This is your crossbow string length.

## Supplies needed (Bow string length calculator)

Before you can measure the crossbow string length, you’ll need to gather a few supplies. You’ll need a tape measure, a marker, and something to use as a reference point (like a door frame). Once you have your supplies, you’re ready to start measuring!

## How to do it

If you’re unsure of what size string you need for your crossbow, it’s important to know how to measure the string length. This is a simple process that only requires a few tools.

First, you’ll need a measuring tape. Measure from the bottom of the crossbow’s rail (where the string sits) to the top of the bow. This is your string length.

Next, you’ll need to determine the poundage of your bow. This information can be found in the owner’s manual or on the manufacturer’s website. Once you have this number, multiply it by 2.5. This will give you your minimum string length.

For example, if your crossbow has a 20-pound draw weight, you would need a 50-inch string (20 x 2.5 = 50).

Now that you know how to measure crossbow string length, be sure to purchase the correct size string for your bow!

## What the string length should be (How to measure bow string length)

When measuring the string length of your crossbow, you will want to measure from the nock groove to the end of the string. You will also want to take into account any serving that is on the string. The standard length for a crossbow string is 16 inches, but you may need a longer or shorter string depending on the make and model of your crossbow. If you are unsure what size string you need, you can always consult the manufacturer’s specifications for your specific crossbow.

## Consequences of wrong string length (How to measure compound bow string length)

If you have a crossbow with a string that is too short, the consequences can be serious. The string can snap back and hit you in the face, causing serious injury. Even if it doesn’t hit you, the string can break and the crossbow can be damaged.

## Maintaining your crossbow strings (How to measure recurve bow string length)

As you probably know, the string is one of the most important parts of your crossbow. It’s what propels the bolt (or arrow) and if it’s not properly maintained, it can cause some serious problems.

That’s why it’s important to know how to measure crossbow string length. This way, you can be sure that your string is always in good condition and won’t cause any issues when you’re out shooting.

Here’s a quick step-by-step guide on how to do it:

1. Start by measuring the length of your crossbow from tip to tail. This will give you the overall length of the string.

2. Next, measure the width of the bow at its widest point. This will give you the width of the string.

3. Now, take these two measurements and subtract the width measurement from the length measurement. This will give you the actual length of the string.

4. Finally, measure the distance between the top and bottom limbs of your crossbow (where the string attaches). This will give you the tension adjustment range for your string.

Now that you know how to measure crossbow string length, it’s time to get out there and start shooting!

Related Posts:

How To Choose A Bow Stabilizer – Tips And Guide

How Long Do Compound Bows Last: Here’s What You Need To Know

## Conclusion

In order to get the most accurate measurement of your crossbow string, it is best to use a tape measure. If you don’t have one readily available, you can also use a ruler or yardstick. For the most precise measurement, make sure to measure from the center of the bowstring to the end of the serving. With this information, you will be able to determine what size crossbow string you need for your bow.