5 Simple Steps: How To Set Up Compound Bow

Introduction

In this blog post, we will be discussing how to set up compound bow. This includes choosing the right size bow, adjusting the draw weight, and setting the proper length. By the end of this post, you should have a better understanding of how to set up compound bow for your next hunting or archery trip.

What You Will Need

In order to set up a compound bow, you will need a few items:

– The compound bow itself
– A quiver for your arrows
– A target
– An arrow rest
– A release aid
– A stabilizer (optional)

If you have all of these items, you’re ready to get started!

Step One: Position the Bow

Assuming you are right-handed, stand with your feet shoulder-width apart and slightly pointed out. This will give you a stable base to work from.

Next, take hold of the bow in your non-dominant hand, holding it by the grip. Place your dominant hand over the top of the bow, around halfway between the grip and the bowstring.

Now gently pull back on the bowstring with your dominant hand, careful not to touch any of the moving parts with your fingers. Bring the string back until it is level with your chin or nose, whichever is more comfortable for you.

Once you have drawn the string back, use your non-dominant hand to hold onto the string just below the nock (the plastic or metal piece at the end of the string). You should now be able to hold the bow steady in this position without too much effort.

Step Two: String the Bow

In order to string your compound bow, you will need to purchase a bow stringer. A bow stringer is a simple tool that helps you put the correct amount of tension on the bowstring without over-stressing the limbs of your bow. You can purchase a bow stringer at most archery or outdoor sporting goods stores.

Once you have your bow stringer, follow these steps:

1. Attach one end of the stringer to the top cam of your compound bow (the cam is the rotating wheel that sits at the top of each limb).

2. Insert the other end of the stringer into the nock (the plastic V-shaped piece) at the bottom of your arrow.

3. Pull down on the stringer until the arrow is pulled tight against the rest (the device that holds your arrow in place on your bow). Make sure that you do not over-tighten the string, as this can damage your bow.

4. Once the string is tight, loop it around the cam and secure it with a knot. Repeat this process on the other side of your compound bow.

Step Three: Adjust the Draw Length

After you have your bow strung and the nocking point set, it’s time to adjust the draw length. The draw length is the distance from the nock point to the string when fully drawn. This is an important setting because it affects both the accuracy and power of your shots.

Most compound bows have a range of adjustments for the draw length, so you can fine-tune it to your specific needs. To adjust the draw length, first, loosen the bolts that hold the limbs in place. Then, move the limbs back or forth to increase or decrease the draw length. Once you’ve found the perfect setting, tighten the bolts back down and take a few practice shots to make sure everything feels good.

Step Four: Attach the Sight

Assuming your bow is already strung, the next step is to attach the sight. For most compound bow sights, there are three main parts: the sight housing, the pins, and the adjuster knob.

Start by attaching the sight housing to the bow. There should be a dovetail rail on the bow where the sight mounts. The sight will slide onto this rail and can be secured with a set screw.

Once the sight housing is in place, it’s time to add the pins. Each pin represents a different distance, and by aligning them with your target, you can more accurately gauge how far away it is. To attach the pins, insert them into the holes in the sight housing and tighten them down with the included Allen wrench.

Finally, use the adjuster knob to fine-tune your aiming point. By turning this knob, you can move the entire sight left or right, which will help you zero in on your target. Once you’re satisfied with your aim, tighten down all of the screws and you’re ready to shoot!

Step Five: Adjust the Sight

Assuming your compound bow is already properly strung, the next step is to adjust the sight. If you’re a beginner, it’s important to get help from a more experienced archer or someone at a pro shop to ensure that your sight is properly installed and adjusted. Once your sight is installed, here are some tips for adjusting it:

1. First, make sure the arrow is nocked (attached) to the string.

2. Next, aim at the target and align the center of the sight pin with the center of the target.

3. Then, using a hex key or Allen wrench, turn the screws on the sight until the sight pin is centered in the peep sight (the small round opening in your bowstring).

4. Finally, tighten all screws securely.

Tips for beginners

If you’re new to compound bows, there are a few things you need to know before you get started. Here are some tips for beginners:

1. Choose the right bow. There are different types of compound bows available on the market, so it’s important to choose one that’s right for you. Consider your height, weight, and skill level when making your selection.

2. Get fitted for arrows. Once you have your bow, you’ll need to get fitted for arrows. The size and weight of the arrows you use will be determined by your bow’s draw length and draw weight.

3. Learn the basics of archery. Before you start shooting, it’s important to learn the basics of archery safety and proper form. You can find plenty of resources online or at your local archery shop.

4. Practice, practice, practice! The only way to get better at shooting is to practice as often as possible. Set up a target in your backyard and take some time each day to work on your aim.”

Related Articles:

What Is The Best Compound Bow For New Archer

How Much Is A Compound Bow And What Do You Need To Know

Conclusion

Compound bows are a great way to get into archery, and with the right setup, they can be incredibly accurate. In this article we’ve gone over some of the basics of how to set up a compound bow, including choosing the right size bow, setting the draw weight, and adjusting the sight. With a little time and practice, you’ll be hitting your targets in no time.